Define：
1.Use the special DST (Direct Synchronization Torque) motor, instead of the previous complicated V-belt drive system,to drive the flat cam directly, to achieve the obvious improvements like: High efficiency,Energy saving, Low consumption & Low fault.
2.Shuttle unit: adopt idler wheel form shuttle, non-lubrication, low pollution.
3.High precision automatic warp tension control system, it offers good condition for better quality fabric.
4.Electrical control system: adopt the European famous-brand program processor to control the loom, strong function, concentrated control, easy operation.
5.Apply to produce flexible intermediate bulk container(FIBC'S), flat container fabric (U-panel FIBC), tarpaulin, geo-textiles and some other woven fabric.
Products PIC :
Technical data :
| Item/Type | SBYZ-850X6 |
| Number of shuttles | 6pc |
| Revolutions(Max.) | 200rpm |
| Weft insertion | 1200ppm |
| Working width/double flat | 300～850mm |
| Working width/double flat（At reduced pick rate） | 700～850mm |
| Number of warp tape | 576pc |
| Warp/weft core inside diameter | 35mm |
| Warp/weft core length | 218mm |
| Warp bobbin diameter(max) | 160mm |
| Weft bobbin diameter(max) | 115mm |
| Main motor power | 3Kw |
| Warp infeed motor rating | 0.15 Kw×2 |
| Haul off motor rating | 0.37 Kw |
| Winder torque motor rating | 1.6Nm |
| Max. roll diameter | φ1200mm |
| Dimensions (A×D×B) | 10100×2800×2950mm |
| Weight | 2t |
Because of the continuous design improvement, some specification change may not be prior notice.